> Markdown version of [/jobs/ext/4086087-fpga-firmware-engineer](https://www.wearedevelopers.com/jobs/ext/4086087-fpga-firmware-engineer). Every page supports `.md` or `Accept: text/markdown`. Links point to the HTML versions so they work for humans too. Agent guide: [/agents.md](https://www.wearedevelopers.com/agents.md).

---

# FPGA Firmware Engineer

- **Company:** Singular Photonics
- **Location:** Edinburgh, UK (Remote available)
- **Experience:** Experienced
- **Contract:** Permanent contract
- **Skills:** Altium Designer, Automation of Tests, C++ (Programming Language), Software Debugging, Linux, Logic Synthesis of Circuits, Embedded Software, Ethernet, Firmware, Field-Programmable Gate Array (FPGA), Imaging Technology, Python (Programming Language), PCI Express, SystemVerilog, Verilog, Vivado, Application Specific Integrated Circuits, Software Version Control
- **Published:** October 28, 2026
- **Apply:** https://www.indeed.com/viewjob?jk=74fbad7766cb9f50

## About the Role

* Strong proficiency in Verilog, and a solid grounding in RTL design, synthesis and timing closure.
 * Hands-on experience with AMD-Xilinx Vivado and its toolchain.
 * Experience writing your own testbenches and verifying a design in simulation before hardware.
 * Experience bringing up firmware on real hardware and debugging it in the lab.
 * Experience with at least one high-speed interface or bus at RTL level.
 * Comfortable in a small company where priorities shift and everyone pitches in.
 * Working with complex, existing codebases and seamlessly integrating new functionality with minimal disruption., * SystemVerilog, and verification practices beyond directed testbenches.
 * Comfortable working in Linux operating systems.
 * Exposure to any of PCIe, AXI interface, USB3, Ethernet, MIPI, LVDS, SLVS or Camera Link.
 * C, C++ or Python for embedded software integration and test automation.
 * Experience with image sensors, time-of-flight, TDCs or single-photon detection.
 * Familiarity with PCB design tools such as Altium Designer, and reading schematics during debug.

Educational Background:

 * Degree in Electronics Engineering or a related field, or equivalent practical experience.
 * 2-5 years' experience in FPGA and digital design., * Rigour: Disciplined about verification - you would rather find it in simulation than on the bench.
 * Debugging: Systematic when the fault could be in the RTL, the board or the sensor, and comfortable with the instruments that tell you which.
 * Clarity: Writes documentation and code that colleagues can pick up without you in the room.
 * Collaboration: Works well across the hardware, ASIC and software boundaries rather than only inside the FPGA.
 * Ownership: Takes a problem from architecture through to a working system, and sees it through.
 * Adaptability: Comfortable in a fast-paced, evolving environment where the requirement can move.

## Description

We are seeking an FPGA Firmware Engineer to join our multidisciplinary R&D team. This is an FPGA role: you will design, implement and verify the Verilog firmware that powers our SPAD sensors, captures photon timing data at high rates and streams it to the host.

Our sensors generate data faster than most imaging systems ever see, so the interesting problems here are real ones: clock domain crossing, timing closure and getting data off the device without losing a photon. You will work alongside our hardware, ASIC and software engineers, from architecture through to system bring-up and customer deployment.

You will report to the Lead Firmware Engineer., * Architecture: Define FPGA requirements and architecture for SPAD sensor readout, in discussion with the hardware, ASIC and software teams.

 * RTL Design: Implement, verify and debug Verilog modules for data acquisition, photon timing, histogramming and sensor control.
 * Verification: Design and run simulations and testbenches, with coverage sufficient to trust the design before it reaches hardware.
 * Synthesis & Timing: Own synthesis, constraints, clock domain crossing and timing closure on AMD-Xilinx FPGA family devices in Vivado.
 * High-Speed Interfaces: Build and integrate the high-speed interfaces that move sensor data: PCIe, USB3, Ethernet, AXI interface, MIPI, LVDS, SLVS, Camera Link.
 * Bring-Up & Debug: Lead firmware bring-up on new boards and sensors, debugging with oscilloscopes, logic analysers and in-system probes.
 * Source Control & Build: Keep RTL under version control with a repeatable, automated build, and document designs to the standard our ISO 9001 design control process requires.
 * Reviews & Support: Contribute to design reviews, and support the software team and customers during field integration., * Firmware that meets timing and functions correctly on first hardware more often than not, with issues found in simulation rather than on the bench.
 * Effective bring-up and debugging support during prototype validation and customer deployment, with hardware and firmware issues resolved promptly.
 * Design documentation, simulation coverage and design review contributions good enough for another engineer to maintain the work.