Lab Test Engineer

• An opportunity for a Lab Test Engineer in the field of Communication Systems (Connectivity & Tactical, Safety and Mission Comms) has arisen within Airbus Defence and Space in Getafe. The selected candidate will join TADVA3, as a member of the Flight & Integration Test Centre.

• Are you someone who enjoys getting hands-on with complex systems, interrogating data generated on them and rigorously assessing their performance?

• Are you someone who needs to see tangible results, excited by technical challenges, fault finding and resolving technical problems with creative solutions with a digital mind-set?

• If so, we would love to have you as part of our team! The position in a nutshell:

• We are looking for a Systems Test Engineer with a background in Military Aircraft Communication Systems specially focused on Aircraft Tactical Datalinks but also with some experience on Connectivity, Safety Comms and Mission Comms.

• The roles and responsibilities lay within the IV&V activities with the final target of demonstrating the correct system's performance providing the evidences needed for the subsequent testing and clearance processes.

• The testing is performed at different levels, from Virtual Testing environments up to Laboratory Subsystem and Global System Integration Rigs but eventually giving also support to on-Aircraft Ground & Flight testing if required.

• The team gives support to all the different programs within the Spanish Airbus Defence and Space portfolio (Eurofighter, A400M, Derivatives, Light & Medium, Eurodrone, SIRTAP, Helicopters, FCAS, etc.).

• A brief list of typical Systems Under Test within TADVA3 is as follows: TCOMS: Tactical Communication Systems: e.g., Link 16, Link 22 and VMF SCOMS: Safety Communication Systems: e.g., SATCOM, Audio Management Systems, V/UHF Radios MCOMS: Mission Communication Systems: e.g., UAV Primary/Secondary Data Links, payload Video/Datalinks CONNECTIVITY Systems: ALIMS (AIRCRAFT LINKS INTEGRATION MANAGEMENT SYSTEM) and JRE (Joint Range Extension) RESPONSIBILITIES/MAIN TASKS

• The main tasks of the jobholder will be:

• Analysis of technical documentation of all the above-mentioned Systems, in combination with the Test Requirements documentation generated by the Design Office, in order to build up a coherent set of Rig Test Cases/Procedures to be executed at Rigs, together with the creation of the Requirements Specification of those Rigs and their associated Validation Procedures.

• Creation of all other Test Datasets necessary prior to the run time test execution, including the creation Simulation Requirements (for TSS), Test Scripts, Initialisation Data files, Tactical Scenarios, etc.

• Execution of the required test steps as described in the Test Procedures, including pre-run time activities (Crypto loading, Sw Loading (if required), Initialisation, etc) and run-time itself (operation of the Rig Test Support System (e.g., MaTE, AIDASS, SEAS, etc) and other Lab Test Equipment (DataBus Analysers, Datalink Simulators (e.g., TIGER, TACTX, MIGATO, LEGS), data recording and downloading, etc

• Analysis of systems' behaviour and creation of Test Reporting documentation.

• Declaration of Equipment/System Problem Reports and management of their lifecycle, including root cause investigations. Management of associated tools for controlling and reporting processes (e.g., DOORS, Octane, Dimensions PCMS, or internal tools such as TestNet, DMS, PRMS, Agilo, etc)

• Specification of ad-hoc Test Tools (for decoding, recording, translation, emulation, automation, etc), including tool qualification, + Technical knowledge on the COMMS Systems Under Test (modes of operation, performance, functionalities, limitations, etc), absolutely independent from the rig environment

• Requirements' interpretation, partitioning and allocation to build-up segregated Test Procedures and any other Test Data Set required before testing, including generic or specific software tooling for requirements' traceability and configuration control

• Systems behavior assessment derived from test results, including problem investigation skills, and the use of generic or specific analysis software tools.

• HANDS-ON_LAB/RIG:

• Technical knowledge on the Lab Equipment, both Standard or Specific to Tactical Datalinks or Connectivity Systems (sniffers, 1553 Databus Analysers, Link 16 Simulators (TIGER/MIGATO/TACTX), etc)

• Technical knowledge on Test Support Systems controlling the execution sessions and associated capabilities (recording, visualisation, automatic scripting, etc)

• Advanced level in English and Spanish, technical and general, is required so that meetings, presentations and documentation are properly managed

• We are looking for candidates educated in a Telecommunications, Industrial-Electronics Engineering or Aeronautical Degree with at least 2 years of experience in as many as possible of the above-mentioned systems, especially Tactical Datalinks and protocols (L16, L22, VMF, JREAP). The higher the 'match', the better, but don't panic, since at Airbus and at TADVA3 we support your personal growth with customized development paths, starting from your team colleagues that will provide you with technical training plus coaching support. You will need skills focused on two main `pillars', + Pro-active approach to problem solving and decision making
• Open-minded, team spirit minded, rigorous and autonomous with a can-do mindset
• Ability to work under strict timescales and milestones as part of an integrated and multifunctional team
• High adaptability to work on new topics, new programs with good networking skills
• NATO security clearance in force (or equivalent) or at least being eligible for it by the recognized authorities.
• Be eligible for ITAR and National Export Control authorisations, This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth.

By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.

Remember that in Airbus you will enjoy: + Attractive salary and special bonus payments + Excellent upskilling opportunities and great international, group wide development possibilities, working in a diverse environment, with more than 140 nationalities. + Special social benefits + On-site-facilities, including canteen and medical services + Work/Life Balance focus, including hybrid working schemes, nursery school, etc. + And many other benefits that are awaiting you, Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Inscribirse en esta oferta Recibir ofertas similares por correo electrónico Al crear una alerta, aceptas nuestros Términos y condiciones y Política de privacidad, y el uso de cookies., Airbus Getafe, Madrid Test Engineer - Remoto eXperience IT Solutions Madrid Volver a la última búsqueda Trabajos ) Comunidad de Madrid ) Madrid ) Connectivity & COMMS (TCOMS, SCOMS, MCOMS) Lab Test Engineer ( volver a la última búsqueda Recibir ofertas similares por correo electrónico No gracias, llévame a la oferta de empleo Al crear una alerta, aceptas nuestros Términos y condiciones y Política de privacidad, y el uso de cookies. Inscribirse en esta oferta Profesiones + Técnico + Recepciónista + Administrador + Ventas + Enfermero