Reliability Engineer - Satellite & Payloads - TeraWave

As the TeraWave Reliability Engineer for Satellite and Payloads, you will serve as the hardware reliability technical focal point across spacecraft bus electronics, RF and optical payload hardware, avionics, EPS, propulsion electronics, GNC hardware, thermal-control hardware, structures and mechanisms, harnesses, connectors, and EEE parts. You will translate mission availability and lifetime objectives into actionable hardware reliability requirements, analyses, design decisions, and verification evidence across a high-rate constellation product lifecycle., * Develop, maintain, and execute the TeraWave hardware reliability and maintainability approach across satellites, spacecraft bus systems, and RF and optical payload hardware, aligned with program mission-success objectives

• Derive and allocate quantitative reliability, availability, and mission-life requirements from system objectives to spacecraft and payload hardware, LRUs, CCAs, EEE parts, mechanisms, harnesses, and critical hardware interfaces.
• Build and maintain reliability block diagrams, functional failure analyses, FMEAs/FMECAs, fault trees, critical-item lists, and single-point-failure assessments for nominal, degraded, contingency, and safe-mode operations.
• Partner with system and hardware subsystem architects to improve design robustness through derating, redundancy, cross-strapping, electrical and mechanical isolation, protective circuitry, design margins, parts selection, and graceful degradation.
• Perform reliability predictions and sensitivity studies using appropriate component, test, supplier, and field/heritage data; clearly state model assumptions, uncertainty, confidence, and limitations.
• Quantify the reliability and availability impact of satellite and payload hardware trades, including, redundancy and sparing, RF and optical terminal architecture, avionics and EPS topology, propulsion capability, sensor and actuator selection, electrical protection, and hardware partitioning.
• Integrate radiation-induced failures, EEE part degradation, thermal and mechanical cycling, optical and RF degradation, mechanism wear, connector and harness failure modes, latent defects, and manufacturing variation into hardware reliability analyses in partnership with Radiation, EEE Parts, M&P, Manufacturing, Quality, and subsystem teams.
• Define hardware reliability demonstration, growth, and verification plans; support qualification, acceptance, highly accelerated, environmental, life, and integrated hardware testing.
• Review requirements, schematics, drawings, interface-control documents, test plans, nonconformances, waivers, and supplier data for hardware reliability impacts.
• Establish reliability metrics and evidence packages for program reviews, architecture closure, PBRs, design reviews, and flight-readiness decisions.
• Communicate technical risk and residual risk in decision-ready terms, balancing mission success, constellation availability, cost, schedule, producibility, and fleet operations., Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Background Check

• Required for all positions: Blue’s Standard Background Check
• Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation
• Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
• Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical

• B.S. in electrical engineering, aerospace engineering, systems engineering, reliability engineering, applied mathematics/statistics, or a related technical field.
• 7+ years of experience in reliability, systems, spacecraft, payload, avionics, or mission-assurance engineering for aerospace or another high-reliability product.
• Hands-on experience with FMEA/FMECA, fault-tree analysis, reliability block diagrams, critical-item management, or quantitative reliability prediction.
• Working knowledge of spacecraft bus and payload hardware such as avionics, EPS, propulsion electronics, GNC sensors and actuators, thermal-control hardware, structures and mechanisms, RF communications, or optical communications.
• Ability to derive clear, verifiable requirements and connect those requirements to analysis, test, inspection, or demonstration evidence.
• Ability to work across hardware design, manufacturing, supplier, test, quality, and operations teams and to present risk to technical and program leadership.
• Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum., * M.S. or Ph.D. in a relevant engineering or reliability discipline.
• Experience with large satellite constellations, long-life LEO/MEO missions, fleet availability, or high-rate aerospace production.
• Experience applying NASA-STD-8729.1, MIL-STD-1629A, ECSS dependability practices, or comparable reliability standards.
• Experience with probabilistic methods, Monte Carlo analysis, Bayesian updating, reliability growth, accelerated-life testing, or physics-of-failure methods.
• Familiarity with radiation effects, EEE parts assurance, derating, worst-case circuit analysis, EMI/EMC, harness design, and materials/process controls.
• ASQ Certified Reliability Engineer or equivalent demonstrated expertise.
• Experience with requirements and lifecycle tools such as DOORS/Next Generation requirements systems, Jira, Windchill/PLM, Python, MATLAB, or statistical analysis software.

CA applicants is $156,802.00 - $219,522.45 CO applicants is $144,179.00 - $201,849.90 WA applicants is $156,802.00 - $219,522.45, * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program.

• Stock Options for all regular employees (working at least 20 hours/week)
• Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays.
• Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company’s intent to reward individual contributions and enable them to share in the company’s results, or other factors at the company’s sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details.