Embedded Systems Engineer

Embedded Systems Engineer (Hardware and Firmware)American Control Electronics in Chanhassen, MNReports to: Engineering ManagerFull-Time On-SiteJOB PURPOSE Responsible for design, development, testing, and maintenance of electronic hardware and embedded firmware for microcontroller- and processor-based products. The role includes schematic capture, PCB design oversight, component selection, embedded C/C++ firmware development, hardware/firmware debugging, system integration, and validation. The ideal candidate has experience with digital and analog circuit design, power electronics, communication protocols (SPI, I²C, UART, CAN, and/or Ethernet), and laboratory test equipment such as oscilloscopes, frequency analyzers, current probes, and logic analyzers. The engineer will work across the entire product lifecycle, from concept through production and field support.JOB RESPONSIBILITY SUMMARYDesign and develop firmware, schematics, and oversee PCBA layout for AC and DC motor controllers and other embedded systemsSelect components with consideration for performance, availability, lifecycle, and costSupport and review PCB layout for signal integrity, power, and thermal performanceCollaborate with clients, 3rd-party engineers, technicians, salespeople, and specialists on custom designs to ensure system-level integrationDefine and support DFM, DFA, and DFT requirementsGenerate and maintain design documentation (BOMs, schematics, test procedures)Support prototype builds, bring-up, debugging, and validation testingSupport design changes and continuous product improvementsMaintain professional, technical, and computer knowledge via continuous educationComply with all safety policies, practices, and procedures; report all unsafe activity to supervisor or Human ResourcesParticipate in team efforts to achieve departmental and company goalsPerform other duties as assignedREQUIRED KNOWLEDGE, SKILLS, & ABILITIES (To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and ability required.)Education/Licensure/CredentialsRequired:Bachelor’s degree in Electrical Engineering, Computer Engineering or related field ExperienceRequired: 3-5 years of experience in hardware and firmware developmentSpecial Knowledge/SkillsRequired: Solid understanding of: Power electronics and signal integrityAnalog and digital circuit designMicrocontrollers, sensors, and communication interfacesStrong schematic design skills (preferably using Altium and/or PADs)Experience with firmware development in C/C++ for microcontrollers and collaboration with firmware teamsHands-on lab experience with oscilloscopes, logic analyzers, and power suppliesExperience supporting designs through prototype and productionAbility to read datasheets, schematics, and manufacturing documentationMust be able to manage multiple projects simultaneouslyPreferred: Experience with motor control circuits and firmware algorithms Experience with SolidWorks/Fusion for system/machine integration and design Familiarity with EMC/ESD mitigation techniques Knowledge of functional safety or regulatory compliance (UL, CE, etc.)Physical Demands Required: (The physical demands described here are representative of those that must be met by by an employee to successfully perform the essential functions of this job. Reasonable accommodation can be made to enable individuals with disabilities to perform the essential functions.)Standing, walking, and sitting for a majority of the timeUse of hands and arms to touch, lift, and reach, etc.Talking and hearing for a majority of the timeTyping for portion of timeLifting and/or exerting up to 10 lbs. of weight/force constantly; lifting and/or exerting up to 20lbs. frequently; and lifting and/or exerting up to 50 lbs. of weight /force occasionallyCognitive requirements include ability to learn quickly, handle multiple complex tasks simultaneously, demonstrate strong attention to detail, and be highly productive without need for much supervisionMust be capable of remembering, imagining, logical, numerical, and verbal reasoning, perceiving, problem solving, and providing output that users can act uponThis job description supersedes all previous job descriptions. The job description is intended to be a tool to describe the primary purpose of the job and the KEY duties and responsibilities. The job description is not to be construed as an exhaustive list of all duties and responsibilities required. Management has the right to add to or change the job responsibilities at any time. All personnel may be required to perform duties outside their normal responsibilities from time to time, as needed. Embedded Systems Engineer (Hardware and Firmware) American Control Electronics in Chanhassen, MNReports to: Engineering ManagerFull-Time On-SiteJOB PURPOSE Responsible for design, development, testing, and maintenance of electronic hardware and embedded firmware for microcontroller- and processor-based products. The role includes schematic capture, PCB design oversight, component selection, embedded C/C++ firmware development, hardware/firmware debugging, system integration, and validation. The ideal candidate has experience with digital and analog circuit design, power electronics, communication protocols (SPI, I²C, UART, CAN, and/or Ethernet), and laboratory test equipment such as oscilloscopes, frequency analyzers, current probes, and logic analyzers. The engineer will work across the entire product lifecycle, from concept through production and field support.JOB RESPONSIBILITY SUMMARY REQUIRED KNOWLEDGE, SKILLS, & ABILITIES (To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and ability required.)Education/Licensure/CredentialsRequired: Bachelor’s degree in Electrical Engineering, Computer Engineering or related field Experience Required: 3-5 years of experience in hardware and firmware developmentSpecial Knowledge/SkillsRequired: Preferred: Experience with motor control circuits and firmware algorithms Experience with SolidWorks/Fusion for system/machine integration and design Familiarity with EMC/ESD mitigation techniques Knowledge of functional safety or regulatory compliance (UL, CE, etc.)Physical Demands Required: (The physical demands described here are representative of those that must be met by by an employee to successfully perform the essential functions of this job. Reasonable accommodation can be made to enable individuals with disabilities to perform the essential functions.) This job description supersedes all previous job descriptions. The job description is intended to be a tool to describe the primary purpose of the job and the KEY duties and responsibilities. The job description is not to be construed as an exhaustive list of all duties and responsibilities required. Management has the right to add to or change the job responsibilities at any time. All personnel may be required to perform duties outside their normal responsibilities from time to time, as needed.

(To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and ability required.), Required: Bachelor’s degree in Electrical Engineering, Computer Engineering or related field Experience Required: 3-5 years of experience in hardware and firmware development Special Knowledge/Skills Required:

• Solid understanding of:
• Power electronics and signal integrity
• Analog and digital circuit design
• Microcontrollers, sensors, and communication interfaces
• Strong schematic design skills (preferably using Altium and/or PADs)
• Experience with firmware development in C/C++ for microcontrollers and collaboration with firmware teams
• Hands-on lab experience with oscilloscopes, logic analyzers, and power supplies
• Experience supporting designs through prototype and production
• Ability to read datasheets, schematics, and manufacturing documentation
• Must be able to manage multiple projects simultaneously

Preferred: Experience with motor control circuits and firmware algorithms Experience with SolidWorks/Fusion for system/machine integration and design Familiarity with EMC/ESD mitigation techniques Knowledge of functional safety or regulatory compliance (UL, CE, etc.), by an employee to successfully perform the essential functions of this job. Reasonable accommodation can be made to enable individuals with disabilities to perform the essential functions.)

• Standing, walking, and sitting for a majority of the time
• Use of hands and arms to touch, lift, and reach, etc.
• Talking and hearing for a majority of the time
• Typing for portion of time
• Lifting and/or exerting up to 10 lbs. of weight/force constantly; lifting and/or exerting up to 20lbs. frequently; and lifting and/or exerting up to 50 lbs. of weight /force occasionally
• Cognitive requirements include ability to learn quickly, handle multiple complex tasks simultaneously, demonstrate strong attention to detail, and be highly productive without need for much supervision
• Must be capable of remembering, imagining, logical, numerical, and verbal reasoning, perceiving, problem solving, and providing output that users can act upon