Senior Technical Lead - Silicon Platform Validation, Python

Debug Sub-System Design & Integration Understanding of on-chip debug infrastructure including: JTAG TAP controllers (IEEE 1149.1/1149.6) and daisy-chain/star topologies CoreSight / ARM Debug Architecture (DAP, SWD, ETM, CTI, cross-trigger matrices) Trace infrastructure (ETB, ETR, TPIU, trace funnels, timestamps) Embedded Logic Analyzers (ELA) / on-chip signal monitors Debug authentication and security (secure debug, debug access levels, lock/unlock) Design and integrate DFx (Design for Debug/Diagnostics) features: Performance counters and event monitors Error logging and first-error capture registers Signal observation via debug muxes and pad multiplexing Register access over debug ports (JTAG-to-APB/AHB/AXI bridges) Debug subsystem interconnect (debug bus, cross-trigger fabric, power-domain-aware debug access) Collaborate with architecture teams on debug use cases: boot debug, crash analysis, performance profiling, in-field diagnostics Design-for-Test (DFT) Understand DFT architecture for complex SoC designs, including: Scan insertion: full scan, compressed scan (Tessent, Modus, DFT Compiler) Memory BIST (MBIST): controller design, repair logic, redundancy allocation Logic BIST (LBIST): self-test controllers, PRPG, MISR, fault coverage analysis Boundary Scan (JTAG): BSR chain design, IEEE 1149.1 compliance At-speed testing: launch-on-shift, launch-on-capture, multi-clock domain handling Drive ATPG pattern generation and achieve target fault coverage (stuck-at, transition, path delay, bridging) Implement test compression (DFTMAX, Tessent TestKompress, EDT) to reduce test data volume and ATE test time Design DFT for low-power: isolation, retention scan, UPF-aware DFT insertion Handle analog/mixed-signal test interfaces (ADC/DAC BIST, PLL test modes, SerDes loopback) Define and implement test access mechanisms (TAM): wrapper chains, hierarchical test, IEEE 1500 wrappers for IP cores Verification & Validation (Most Important) Verify DFT/debug RTL through simulation and formal methods: JTAG TAP compliance tests Scan chain integrity checks MBIST/LBIST functional verification Debug authentication sequence validation Run DRC (Design Rule Checks) for DFT: scan rule violations, clock gating, X-sources, hold-time fixes Perform ATPG dry runs and iterate on coverage closure with design teams Support post-silicon DFT validation: scan pattern bring-up, MBIST execution, yield debug Debug test escapes and drive corrective actions (pattern update, DFT ECO, coverage gap closure) Manufacturing Test & Yield Collaborate with test engineering and ATE teams on test program development Optimize test cost: pattern count, test time, multi-site efficiency, compression ratio Support yield analysis and diagnosis: failing pattern debug, defect localization, systematic vs. random fail classifica

Education: B.S./M.S./Ph.D. in Electrical Engineering, Computer Engineering, or related field Experience: 4-10+ years in DFT, debug subsystem design, or silicon test engineering

Strong expertise in one or both domains: Domain

Key Skills

Debug Sub-System

JTAG/IEEE 1149.1, CoreSight/ARM DAP, trace (ETM/ETB/TPIU), ELA, secure debug, cross-trigger, debug mux, DFx registers